|
Inflation
Begin by inflating each compartment under medium pressure, and then increase gradually to the recommended pressure of 220mb.
Caution
Do not leave a boat which has been beforehand inflated under cool pressure in direct contact with heat or sunlight. The pressure inside the air chamber will increase significantly and this could cause damage to the boat.
|
| |
|
|
Towing
Always empty the fuel tank before towing. Never tow by the front metal handle. The steel D- ring fitted in the polyester on the boat is meant for this.
Trailing
When towing on trailers, a good and adapted trailer is necessary, in order to avoid premature wear and/or damage. The rear rollers must hold the back of the boat. Make sure that boats with motors are well fitted and securely fastened to the trailer. This is to makes sure that the motor keeps an upright position during transportation and does not topple. Local safety regulations must be respected The steel D –Ring is to be fixed to the trailer winch with a hook. It is equally recommended to securely tighten all fasteners and slings to aboid as much shaking as possible..
|
| |
|
|
To launch your ship
Please take the signal plate off at the back of the trailer. Move backwards nearby the water, put on the brakes of the car and the trailer. Please secure the rope at the bow of the boat long enough to keep control of the boat during the release operation. Then operate the winch to make the boat go backwards into the water
.
Storage
Please rinse the boat with clear water and make sure that the boat is clear of sand and stones. Warehouse the boat preferably with half inflated floats.
|
| |
|
|